Funnel Cube SUS

Hi kids,
I have 3 "Funnel Cubes" I'm offering today via a Sign Up Sale.
Made from Super Conductor with a .900 cubed outside dimension featuring a 3D interpolated funnel feature in all 6 sides.
These have a warm feel in hand, and the patterns between the Copper & Niobium are mesmerizing.
There are only the three at the moment, I might do a few more in the near future.

USA price = $300.00
OCONUS price = $325.00 

Sign up is Closed, and entry page link disabled.
Here are the winners:
7     Vyse Long John Alberic    
19     Kaptein James Fishhawk    
11     Roronoa Gavin Zahab

Winning Email notifications with payment information are sent from SignUpSale.com , so be sure to check your spam folder once the sale is over.

Thanks folks,
Kenn 

 

Nebuli Mach III SUS

Hello all,
Today I have for your consideration one last  Nebuli Mach III knife.

 Physical specs:
One piece Chad Nichols forged Moku-Ti integral frame in a heat anodized finish.


In the interest of full disclosure, this one has a wee issue in the Moku-Ti frame at the tail end.
Twas nothing I did, but rather a flaw in the material itself. Have a look at the pic, you can barely see it however I want it known it's there eh. This does not effect functionality in any way. Maybe I'm just being anal about it, but I've also discounted the price for this piece as well.

Again due to said "issue" I went ahead, and added some bells & whistles to make up for it.
Such as the S.E.T.I. frame cut outs, a Self Lighting Gas Vial in Green added to the lockbar, and additionally a custom  Moonglow thumb disk.

Blade material is Chad Nichols forged Stainless Steel Damascus, wonderfully etched. and finish ground by Tom Krein.
.375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Actual cutting edge is 1.500 in length.

Price = $750.00
USA shipping via USPS Insured Priority Mail.
OCONUS shipping via USPS Priority International Mail. I'm not responsible for lost/stolen international packages once I drop them off at the Post Office.

Sign up is Closed, and entry page link disabled.
Here's the winner:
6 Atomsk Roger Thoas
 
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
Thank you,
Kenn

 

One Off Pagoda Cube In Super Conductor Auction

 Hello there peoples,
Let's have an auction for this one off  "Pagoda Cube In Super Conductor".
It's called the Pagoda Cube because if you hold it at the correct angle the interior features each resemble a little Japanese temple. I also find it to be very MC Escheresque.
This Cube measures .900*.900*.900.
High bidder wins.......... :)
An Email will be sent at the Auctions end with payment info from http://signupsale.com/
Also I have enabled the "Anti sniping feature", so the auction may run past the 9:00pm Saturday 2/20 stated end time.
USA shipping will  be via USPS insured Priority Mail.
OCONUS via USPS Priority Intentional, and I'm not responsible for the package once I drop it at the post office.
Alrighty then I think that about covers things?
This auction is over, and the bidding link has been disabled.
Thank you to all who participated, and congratulations to the winner with a high bid of  $350.00.
Thanks folks,
Kenn

 

ET TiTe Pocket Level SUS

Moving right along then,
Let's have the 2nd. Sign Up Sale of 2016.
 I have 4 ET TiTe Pocket Levels ready to go.
Physical specs:
Material: 6AL4V Titanium with a Tellurium Copper captivation plug, hence the TiTe nomenclature.
Height .5625, Width .447, Overall Length 2.375.
One end features a 45 degree angle, while the other sports a 30/60 depending how you're holding the level.
The ET designation denotes the sweet engine turned finish applied to both sides of the level. I only did a few of these since the process was fairly time consuming.
USA = $145.00
OCONUS = $164.00
Sign up is Closed.
Here are the winners:
5     Taicoon Black Blubber    
40     JSA    
7     Long John Jack Rool    
10     Gilbert Du Drummond 
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder once the sale is over.
Thanks folks,
Kenn
I did much better post processing this picture...HA!

TiTe Pocket Level SUS

Good Morning folks,
Let's have the 1st. Sign Up Sale of 2016.
Today I have 10 TiTe Pocket Levels ready to go.
Physical specs:
Material: 6AL4V Titanium with a Tellurium Copper captivation plug, hence the TiTe nomenclature.
Height .5625, Width .447, Overall Length 2.375.
One end features a 45 degree angle, while the other sports a 30/60 depending how you're holding the level.
USA = $125.00
OCONUS = $144.00
Sign up is Closed
Here are the winners:
73     Khan Jack Cockparrot    
69     Clean1    
42     gmerin    
44     Lucaszy    
7     Sneaky Von Plank    
62     Jp fr    
86     Slashing Smith    
66     jaggedx    
36     Henriette La Terrible    
27     zapp brannigan 
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder once the sale is over.
Thanks for dropping by,
Kenn
Oh yeah, I know this picture is horrid.... I got carried away with editing it, and well yeah it's just awful.

MERRY CHRISTMAS

Wishing you, and yours a very Merry Christmas.
I dunno if I'll have another sale before 2015 ends, so I'll thank you all in advance for your wonderful continued support of all things JMA.
Kenn

ACL's General Sale

Hi there,
This is a General Sale for "Deluxe Edition ACL's".
Any color you like Maroon, OD Green, or Black.
In any color, or quantity combination....while supplies last!

Specs:
Made from 7075 Aluminum.
Measuring .265 thick, x .625 high, and 1.950 in length.
The sides are sculpted , and contoured producing an exceptional fiddle factor.
Post machining, these were tumbled, then garnet blasted prior to being sent off for Type III hard anodizing.
Purposes are the cap lifter, use of the thumb jimping as an assist for twist off caps.

This is a general sale 1st. come 1st. served.
Pricing:
USA = $30.00 for one, and $25.00 for each additional piece.
OCONUS = $57.00 for one, and $25.00 for each additional piece.

To make a purchase, Email me with your color, or quantity combination choices at jordanmetalart@gmail.com
I'll reply with your total, and my Pay Pal information.

Thanks so much,
Kenn

Anti Abduction Amulet SUS

Hello there,
Today for a Sign Up Sale I have 2"Anti Abduction Amulets ".
Specs:
Material = Tellurium Copper.
.1875 thick with dimensions of 1.750 x 2.000 over the ellipse shape.
The image is machined on both sides for a full on fiddle factor.
USA = $95.00
OCONUS = $114.00
Sign up is Closed
Here are the winners:

11	GRUMPYER1
40	Elizabeth Licorice

Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder once the sale is over.
Thank you,
Kenn 

Just a still pic from a video on my phone. The internet here at the shop is stupid slow, and wouldn't let me upload the actual video...UGH

Anti Abduction Amulet SUS

Hiya folks,
Today for a Sign Up Sale I have 3 "Anti Abduction Amulets ".
Okay so maybe they're just challenge coins, or worry stones, but are you really prepared to take that chance if/when you get abducted?
This was a spur of the moment project, and I really wasn't prepared with a proper amount of stock on hand so there's just a few of these to be had.
I dig all things space, and or alien related.
After watching the Ancient Aliens program which focused on an found item called "The Roswell Rock". I said to myself I wanna do something with that design, which also popped up as a crop circle in Europe in the past.
I really like how the machining marks from the 1/16 endmill ended up resembling the crop circle images I've seen. 
I set to work laying out the design, and was quite intrigued by rigid math involved in what appears to be a straight forward image.
Specs:
Material = 6061-T6 Aluminum ......UFO grade of course.
.1875 thick with dimensions of 1.750 x 2.000 over the ellipse shape.
The image is machined on both sides for a full on fiddle factor.
USA = $85.00
OCONUS = $104.00
Sign up is Closed
Here are the winners:
30     rugerfanuk    
51     rockymtnomad    
57     Mike J

Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder once the sale is over.
Thank you,
Kenn

Friendly Reminder

Hi all, 

I'd just like to take a moment to remind folks who signed up for the Black Friday Deluxe Edition ACL's in Black General Sale that payment Emails have been sent.

I understand you may have overlooked sending funds due to the Thanksgiving weekend.

I'd really like to ship the ACL's out to you all.

Please check your SPAM folder as payment Emails were sent from SignUpSale.com

Carry on,

Kenn 

Black Friday Deluxe Edition ACL's in Black General Sale

Oh man, I'm still full from all the Thanksgiving meal goodness....whew!
I hope everyone else had a great day as well.
Anyway, for today I have the final wave of  "Deluxe Edition ACL's" set to go.
Specs:
Made from 7075 Aluminum.
Measuring .265 thick, x .625 high, and 1.950 in length.
The sides are sculpted , and contoured producing an exceptional fiddle factor.
Post machining, these were tumbled, then garnet blasted prior to being sent off for Type III hard anodizing in Black.
Purposes are the cap lifter, use of the thumb jimping as an assist for twist off caps.
This is a general sale 1st. come 1st. served.
Price for a single ACL:
USA = $40.00
OCONUS = $59.00
Any additional pieces are $35.00 each wherever you are.
Limit of 6 pieces total per person.
This sale has ended, and the purchase  LINK has been disabled.
The sale will run till all are sold out, or when I see interest has tapered off.
When the sale does end, an Email with payment info will be sent to those who made purchases.
***Please wait until you have received said Email before sending funds.***
Payment Emails will be sent from SignUpSale.com , so be sure to check your spam folder.
I thank you kindly,
Kenn

Thanksgiving Day Give Away

Hello all,
I'm hosting a Give Away to show my appreciation for your continued support of all things JMA.
Up for grabs are 2 full sets of ACL's.
Each set contains 1 each Maroon, OD Green, and Black ACL.
One entry per person. Open to anyone, anywhere.
Give Away is Closed.
Here are the winners:

212	Guybrush La Scarblade
28	Avery Angstrom Markel

I'll generate the 2 winners Thanksgiving afternoon, or early evening between Turkey induced coma naps....lol
Winning notification Emails will be sent from SignUpSale.com , so be sure to check your spam folder.
Happy Thanksgiving Day to you & yours,
Kenn

 

Deluxe Edition ACL in OD Green General Sale

Hello all,
I have the 2nd. wave of  "Deluxe Edition ACL's" ready to go here.
Specs:
Made from 7075 Aluminum.
Measuring .265 thick, x .625 high, and 1.950 in length.
The sides are sculpted , and contoured producing an exceptional fiddle factor.
Post machining, these were tumbled, then garnet blasted prior to being sent off for Type III hard anodizing in OD Green.
Purposes are the cap lifter, use of the thumb jimping as an assist for twist off caps.
This is a general sale 1st. come 1st. served.
Price for a single ACL:
USA = $40.00
OCONUS = $59.00
Any additional pieces are $35.00 each wherever you are.
Limit of 6 pieces total per person.
This sale has ended, LINK  disabled.
The sale will run till all are sold out, or when I see interest has tapered off.
When the sale does end, an Email with payment info will be sent to those who made purchases.
***Please wait until you have received said Email before sending funds.***
Payment Emails will be sent from SignUpSale.com , so be sure to check your spam folder.
I thank you kindly,
Kenn
PS: I'll try for a better pic in natural light tomorrow AM.

Deluxe Edition ACL in Maroon General Sale

Hiya folks,
It's time to release the 1st. wave of "Deluxe Edition ACL's", or Aluminum Cap Lifters.
Specs:
Made from 7075 Aluminum.
Measuring .265 thick, x .625 high, and 1.950 in length.
The sides are sculpted , and contoured producing an exceptional fiddle factor.
Post machining, these were tumbled, then garnet blasted prior to being sent off for Type III hard anodizing in Maroon.
Purposes are the cap lifter, use of the thumb jimping as an assist for twist off caps.
This is a general sale 1st. come 1st. served.
Price for a single ACL:
USA = $40.00
OCONUS = $59.00
Any additional pieces are $35.00 each wherever you are.
Limit of 4 pieces total per person.
This sale has ended, LINK  disabled.
The sale will run till all are sold out, or when I see interest has tapered off.
When the sale does end, an Email with payment info will be sent to those who made purchases.
***Please wait until you have received said Email before sending funds.***
Payment Emails will be sent from SignUpSale.com , so be sure to check your spam folder.
Ever appreciative of your support,
Kenn

Nebuli Mach III SUS

Happy Halloween kids,
Today I have for your consideration the last 2 Nebuli Mach III knives of the run.
Physical specs:
One piece Chad Nichols forged Moku-Ti integral frame in a stellar heat anodized finish I might add.
Blade material is Chad Nichols forged Stainless Steel Damascus in Whiplash pattern, wonderfully etched. and finish ground by Tom Krein.
.375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Actual cutting edge is 1.500 in length.
A custom 3 color Mokume thumb disk rounds it all off.
Price = $825.00
USA shipping via USPS Insured Priority Mail.
OCONUS shipping via USPS Priority International Mail. I'm not responsible for lost/stolen international packages once I drop them off at the Post Office.
Sign up is Closed
Here are the winners:
11 Eddie 
26 X2dogs  
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
Thank you,
Kenn

The Last Lefty Mach III Nebuli SUS

 Hey Lefties,
( I want you all to imagine I was able to get Adam "Ad-Rock" Horovitz of the Beastie Boys to yell that for me eh.... )

 Today for your consideration I have the very last Lefty Damascus Bladed Nebuli Mach III in my checkered frame style ready for a sign up sale.
Specs:
One piece 6AL4V Titanium integral frame.
 .375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Blade material is Chad Nichols forged Stainless Steel Damascus in Raindrop pattern, wonderfully etched. and finish ground by Tom Krein.
Actual blade cutting edge is 1.500 in length.
Featuring a custom Titanium thumb disk anodized Blue as well as matching Blue anodizing of the frame checkering.
Price = $650.00
USA shipping via USPS Insured Priority Mail.
OCONUS shipping via USPS Priority International Mail. I'm not responsible for lost/stolen international packages once I drop them off at the Post Office.
Sign up is Closed.
Entry  LINK disabled.

Here is the winner:
12 Vyse Arthur Scratch

Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
Thanks for dropping by,
Kenn

Nebuli Mach III Auction

Howdy kids,
Let's have ourselves an Auction.
Up for grabs is a special Nebuli Mach III.
Physical specs:
One piece Chad Nichols forged Moku-Ti integral frame in a stellar heat anodized finish I might add.
Blade material is Chad Nichols forged Stainless Steel Damascus in Whiplash pattern, wonderfully etched. and finish ground by Tom Krein.
.375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Actual cutting edge is 1.500 in length.
But wait, there's more, a custom Moonglow thumb disk, and a teardrop Moonglow scale inlay followed by a 2mm*8mm Green Self Lighting Gas Vial installed in the lockbar.
This will be the only Nebuli Mach III offered via an auction, the few remaining knives from this run will be via regular sign up sales.
This Auction ended at  9:00pm Eastern Wednesday 9/2.
The LINK to bid has been removed.
High bid was  $1150.00, thank to all the bidders.
Ever appreciative of your support,
Kenn  

 

Damascus Bladed SETI Framed Nebuli Mach III SUS

Hello there,
Today  I have 1 each of a Lefty & a Righty Damascus Bladed SETI Framed Nebuli Mach III for this sign up sale.
Physical specs:
One piece Titanium 6AL4V integral frame in hand rubbed scotchbrite finish.
Blade material is Chad Nichols Stainless Steel Damascus in Raindrop pattern, wonderfully etched. and finish ground by Tom Krein.
.375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Actual cutting edge is 1.500 in length.
Currently each has a plain custom Titanium thumb disk which I'll gladly anodize whatever color should the winners wish it done.
Price = $575.00
USA shipping via USPS Insured Priority Mail.
OCONUS shipping via USPS Priority International Mail. I'm not responsible for lost/stolen international packages once I drop them off at the Post Office.
 LINK removed to the Righty entry page.
 LINK removed to the Lefty entry page.
One entry per person, and you can only enter one  SUS.
Sign up is Closed.
Righty winner is  88 Ragnar Black John Cooper
Lefty winners is 12 Longbranch Pennywhistle
Email notifications with payment information are sent from SignUpSale.com , so be sure to check your spam folder after the winners have been announced. 
Thank you for the support,
Kenn
 



 


 

Titanium Cam Bead SUS

 Howdy kids,
Here we go with a "Titanium Cam Bead" sign up sale.
Titanium Cam Bead Physical specs:
.600 diameter x .5625 in length. .0625 diameter spot drill accents in all 9 cam lobes.
 .201 diameter hole thru the bead center to accommodate para cord.
These were given a good stonewashing, and then blasted with Garnet leaving them with a really nice satin finish.
I have anodized these in a variety of colors so should you win it'll be a surprise as to what ya get.
USA = $55.00
OCONUS = $74.00
Sign up is Closed. 
Here are the winners:
 42     Redbeard Morgan    
24     I wish I could buy your house :)    
26     dans    
8     jaggedx    
31     e man    
37     Chase    
30     Dirty Water    
46     The Road warrior    
39     FM Atom    
28     grumpyer1    
12     gmerin    
45     KLH    
10     ralphdrocketman    
22     LeFwee Joan Atomsk    
20     Deckard    
49     Dorian 
15     elfan
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
Thanks for stopping by,
Kenn 

 

Damascus Bladed Nebuli Mach III SUS

Hello there,
For today I have 2 Damascus Bladed Nebuli Mach III's in my checkered frame style ready for a sign up sale.
Yes Damascus....finally.
Now, I'm a machinist, I don't grind, so up to this point all my blades have had machining marks which I've always liked. However when I "pre-etched" these Dammy ones it became apparent that the machining marks & the etch weren't gonna play well together. I got a hold of Tom Krein, and he did a full regrind of the blades, the stunningly beautiful etching work, and put a bad ass final edge on em. I'm most pleased with the end result, and quite happy to have gotten Tom to collaborate with me on these.

Specs:
One piece 6AL4V Titanium integral frame.
 .375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Blade material is Chad Nichols Stainless Steel Damascus in Raindrop pattern .
Actual blade cutting edge is 1.500 in length.
These 2 Nebuli each feature a custom Titanium thumb disk anodized Blue along with a Blue Ti Cam bead attached to the zippered pouch.

Price = $625.00
USA shipping via USPS Insured Priority Mail.
OCONUS shipping via USPS Priority International Mail. I'm not responsible for lost/stolen international packages once I drop them off at the Post Office.

Sign up is Closed.
Here are the winners out of a stunning 111 entrants:
104     Harlock Thomas Merrick    
51     Kittonmittons

Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
There will be more variants coming over the next few week. 
Thanks for dropping by,
Kenn