Wednesday, December 31, 2014

HAPPY NEW YEAR

Hiya boys & girls,
Here's wishing you all a Happy New Year.
2015...wow seem like just yesterday I was getting used to writing 1980 on my school work papers.

Monday, December 29, 2014

SETI Framed Nebuli Mach III SUS

And we're back.....
SETI Framed Nebuli Mach III's, I have 4 for this sign up sale.
These feature a CPM S30-V blade, and a one piece Titanium 6AL4V integral frame in hand rubbed scotchbrite finish.
Physical dimensions are, .375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Actual cutting edge is 1.500 in length.
A Green Ti custom thumb disk rounds it off.
Price = $375.00
USA shipping via USPS Insured Priority Mail.
OCONUS shipping via USPS Priority International Mail. I'm not responsible for lost/stolen international packages once I drop them off at the Post Office.
Sign up is Closed.
Here are the 4 winners out of 111 entrants:
2 Chris W


105 Glen


74 GRUMPYER1


78 Gabriel (Luffy Monkey)

Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
Thanks folks,
Kenn









Left SETI Framed Nebuli Mach III SUS

Well hello there,
Lefty SETI Framed Nebuli Mach III's, I have 2 for this sign up sale.
These feature a CPM S30-V blade, and a one piece Titanium 6AL4V integral frame.
Physical dimensions are, .375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Actual cutting edge is 1.500 in length.
A Blue Ti custom thumb disk rounds it off.
Price = $375.00
USA shipping via USPS Insured Priority Mail.
OCONUS shipping via USPS Priority International Mail. I'm not responsible for lost/stolen international packages once I drop them off at the Post Office.
One entry per person, and please be a lefty if you enter. I have lots more right hand versions  in process eh.
Sign up is Closed.
Here are the winners:
10 Jared T


15 Dan C
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
Thanks folks,
Kenn

Sunday, December 21, 2014

Nebuli Mach III SETI SUS

Good morning all,
I have lots to do here today, so I apologize if this sale post appears sloppy.
SETI Framed Nebuli Mach III's, I have 4 for this sign up sale.
All of these feature a CPM S30-V blade, and a one piece Titanium 6AL4V integral frame.
Physical dimensions are, .375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Actual cutting edge is 1.500 in length.
Finish on the frame is hand rubbed scotchbrite.
Now, I was unable to access the lathe yesterday to make custom Ti thumb disks, so these have off the shelf SS disks. To make up for this, I'll be including a plain Ti Cam bead you can add as a lanyard bead to the Nebuli.
Price = $375.00
USA shipping via USPS Insured Priority Mail.
OCONUS shipping via USPS Priority International Mail. I'm not responsible for lost/stolen international packages once I drop them off at the Post Office.
Sign up is Closed.
Here are the winners out of 112 entrants:
99 Kones


36 Nick F


66 Jerm


64 Brett B

Happy Holidays,
Kenn
 
 

Friday, November 28, 2014

Nebuli Mach III SUS

Hey kids,
Guess what?
The 1st. wave of the long awaited Nebuli Mach III knives are all set to go.
All of these feature a CPM S30-V blade, and a one piece Titanium 6AL4V integral frame.
Physical dimensions are, .375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Actual cutting edge is 1.500 in length.
Both the blade, and frame have been tumbled for nice blended finish that'll hold up for years to come.
Though the pictures show a plain Ti custom thumb disk, I will anodize it any color cept red or black should the winner choose.
Price = $325.00
USA shipping via USPS Insured Priority Mail.
OCONUS shipping via USPS Priority International Mail. I'm not responsible for lost/stolen international packages once I drop them off at the Post Office.
Sign up is Closed
Right handed winners:
141 Jordon


197 Tom D


218 Jonathan T.


188 John A


62 Susan B = rainbow


171 Kp


42 Sunshine


166 Jason A    
 Left handed winners:
15 Larissa


9 Mat Div
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.




Tuesday, November 4, 2014

Zip Mag Top SUS

 Hello folks,
Hey now you all remember the Zip Mags right?
Well they weren't the big seller I had envisioned, so I had the idea to design up a spindle, and make a bunch of em into tops.
Physical specs:
The Mag itself is .250 thick x .750 in diameter 360 Brass.
Adding the included "O" ring makes em 1.000 in diameter.
The 6061-T6 Aluminum spindle is .200 in diameter by .750 over the .065 ceramic ball.
USA = $65.00
OCONUS = $84.00
Sign up is closed.
Everyone who entered won!
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder. 
Thanks for checking in,
Kenn 
 

Wednesday, October 8, 2014

Spectrum Anodized Titanium Cam Bead SUS

Hello all, Here are the last of the Cam Beads from the latest run.
I have just 8 "Spectrum Anodized Titanium Cam Beads" for this sign up sale.
Titanium Cam Bead Physical specs:
 .600 diameter x .5625 in length.
.0625 diameter spot drill accents in all 9 cam lobes. 
.201 diameter hole thru the bead center to accommodate para cord. 
These were given a good stone washing, and then blasted with Garnet leaving them with a really nice satin finish prior to anodizing. 
Sign up is Closed.
Here are the winners:

9 BRAHWEWHITE


1 It's rigged


26 todd h


24 dan s


4 Clarence


5 Mr Sexy


17 Jack S


7 Tim F



Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder. 
USA = $60.00
OCONUS = $79.00  
Thanks for your support,
Kenn
 









































































Friday, October 3, 2014

Green Anodized Ti Cam Bead SUS

Hiya folks,
Here we go with the "Green Anodized Titanium Cam Beads" sign up sale.
They look better in person, the lighting wasn't on my side tonight for picture taking.
Titanium Cam Bead Physical specs:
 .600 diameter x .5625 in length.
.0625 diameter spot drill accents in all 9 cam lobes.
.201 diameter hole thru the bead center to accommodate para cord.
 
These were given a good stone washing, and then blasted with Garnet leaving them with a really nice satin finish prior to anodizing.
Sign up is Closed.
Here are the winners: 
26 Larry O


20 Slartibartfast


2 TCBOR


6 Zinkhan


8 Chris B


1 newsman


28 DaveyB


29 Dawn M


23 todd h


33 jared t


16 Art m


7 Andrew W


4 Bail


24 Jim M


5 Hagop
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
USA = $60.00
OCONUS = $79.00
Thanks for checking in,
Kenn
 
 
 








































































Thursday, September 25, 2014

Titanium Cam Bead SUS

Howdy kids,
Here we go with the "Plain Titanium Cam Beads" sign up sale.

Titanium Cam Bead Physical specs:
 .600 diameter x .5625 in length.
.0625 diameter spot drill accents in all 9 cam lobes.
.201 diameter hole thru the bead center to accommodate para cord.
These were given a good stonewashing, and then blasted with Garnet leaving them with a really nice satin finish.  
Sign up is Closed.
Here are the winners:
19 Eskerbillion


37 Jason S


33 Jeffrey P


39 todd h


8 Andrew W


18 Dawn Michelle


25 az


11 819


14 elfan


21 In for a Ti cam


2 tim f


6 TCBOR


15 Hey_Yo_TTF


22 Sean P


34 Yoni
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
USA = $55.00 
OCONUS = $74.00
Thanks for your consideration, and anodized versions will be coming soon.
Kenn

Tuesday, September 23, 2014

Tellurium Copper Micro Bit Twist SUS

Hi folks,
Let's have a sign up sale for a few  "Tellurium Copper Micro Bit Twists".
I have 10 tools available for a sign up sale.
This tool is .375 thick x .625 wide over the .312 radii x .625 high not including the bit.
The bit holder is a 1/4 hex machined .400 deep. In one side is a  #8-32 socket set screw to hold the bit in place
To top it off, there is a small split ring attached, so you can put this on your key chain.
While the tool comes with a #2 Phillips bit you can replace it with any 1/4 hex bit that is to your liking. A 5/64 short arm Allen wrench is included.
USA = $45.00
OCONUS = $64.00
Sign is Closed.
Here are the winners: 
22 HS


47 Cliffy


26 Brendan P


38 Mr P


4 Gary M


43 Scott B


12 MikeK


28 TCBOR


1 Josh


44 Eliot G
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
Thank you for dropping by,
Kenn 
Yes, the infamous paper towel has reappeared...lol

Wednesday, September 17, 2014

Bronze Micro Bit Twist SUS

Hi folks,
If you've been keeping tabs on the JMA Facebook page, you know I'm making good progress on the latest Nebuli knife run.
While I was running the blade "grind" operation this past weekend, I had ample cycle time to produce some  "Bronze Micro Bit Twists".
I have 14 tools available for a sign up sale.
This tool is .375 thick x .625 wide over the .312 radii x .625 high not including the bit.
The bit holder is a 1/4 hex machined .400 deep. In one side is a  #8-32 socket set screw to hold the bit in place
To top it off, there is a small split ring attached, so you can put this on your key chain.
While the tool comes with a #2 Phillips bit you can replace it with any 1/4 hex bit that is to your liking. A 5/64 short arm Allen wrench is included.
USA = $45.00
OCONUS = $64.00
Sign is Closed.
Here are the winners:
1 Andrew W


39 Frederico F


28 Jeff P


2 Gary g


18 Outils


37 Slappybonehead


35 Nick F.


14 TCBOR


12 Otis M


36 Kendall


11 Dave Au


21 tim f


40 Kim S


8 fishfinder go
 Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
Thank you for dropping by,
Kenn 

Thursday, September 11, 2014

ZIP MAG 1st. come 1st. served sale.

Good morning all,
Zip Mags via a 1st. come 1st. served sale.
I know "Old school" right?
I have 54 on hand, and this will be a 4 per person limit sale.
Physical specs:
The Mag itself is .250 thick x .750 in diameter.
Adding the included "O" ring makes em 1.000 in diameter.
While a little on the large size for a knife lanyard bead, I do feel they're ideal as zipper pulls for coats, backpacks, or other gear.
Price = $40.00 each.
USA, add $6.00 to the order.
OCONUS, add $24.00 to the order.
Please Email:  jordanmetalart@gmail.com 
Remember to include the quantity of Zip Mags you'd like.
Since this is a FCFS sale, please be patient while I reply to each Email in the order received.
Thank you,
Kenn



Monday, September 8, 2014

ZIP MAG SUS

Hello all,
I have a new one for you today, the "Zip Mag".
These are made from 360 series Brass, and feature an added "O" ring to act as the tire.
The Mag itself is .250 thick x .750 in diameter.
Adding the "O" ring makes em 1.000 in diameter.
While a little on the large size for a knife lanyard bead, I do feel they're ideal as zipper pulls for coats, backpacks, or other gear.
I have 30 available for today's sign up sale, with more to come.
Sign up is closed.
Here are the winners:
No need to post a list, must be a slow night on the internet?
Everyone who entered won :)
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
USA = $45.00
OCONUS = $64.00
Ever appreciative of your support,
Pic by Shelby
Kenn


Saturday, August 23, 2014

Micro Bit Twist SUS

Hey kids,
Here's a blast from the past.
I have 30 "Micro Bit Twist" tools for a sign up sale.
Do you ever need a screwdriver for a quick adjustment, but are away from the tool box or the kitchen junk drawer?
Well here we have the "Micro Bit Twist", made of 316 Stainless Steel.
This tool is .375 thick x .625 wide over the .312 radii x .625 high not including the bit.
The bit holder is a 1/4 hex machined .400 deep. In one side is a  #8-32 socket set screw to hold the bit in place.
To top it off, there is a small split ring attached, so you can put this on your key chain.
While the tool comes with a #2 Phillips bit you can replace it with any 1/4 hex bit that is to your liking.
USA = $45.00
OCONUS = $64.00
Sign is closed.
Here are the winners: 
45 I need a Nebuli!!!


8 I'm on the highway


19 Greg Y


41 eric Eric ERIC


20 John B


31 Cory R


6 Michael J


10 Jonathan C


33 Nick F


3 Josh


47 sunshine


27 Jeff R


39 Gary M


18 jim mc


15 Chris B


49 hey_yo


40 elfan


44 ChrisA


4 Chris W


42 Colorado


43 Gerald R


25 C.J. M


24 Rcarlino80


48 m_yo


46 James "yes I would like another glass" Gregory


54 jsa


53 chimes13


13 TCBOR


2 Grant


9 randy l

Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
Thanks for stopping by,
Kenn 
 

 

Sunday, August 17, 2014

Deluxe Edition TiBIA SUS

Hello all,
Today I have 6 "Deluxe Edition TiBIA's", or Titanium Beverage Imbibing Accessories ready for a sign up sale.
Will there be more in the future? I dunno, but it's not high on my todo list. These were a pill to machine, and had a long cycle time as well. 
 The side of these have been contoured, and sculpted producing an exceptional fiddle factor.
I gotta say, I'm pretty darned please with how nice these came out.
These are made from 6AL4V Titanium, and measure .265 thick, x .625 high, and 1.950 in length.
Post machining, these were garnet blasted, tumbled, and finally anodized either Green, or Blue.
These are pre packaged, so the color you receive will be a surprise.
USA = $100.00
OCONUS = $119.00
 Sign up is Closed.
Here are the winners:
2 Art M


40 Katianchance


22 jack


3 Big Al


14 Sean D.


66 Scott B
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
Thanks for stopping by,
Kenn  

Tuesday, August 5, 2014

Neptune Top SUS........Part Two

Hello all,
I have another 18  "Neptune Tops" ready ready for a sign up sale this evening.
Specs:
Tellurium Copper, 1.200 diameter * .750 in height with a 1/16" 440C SS hardened ball tip.
Plain machined finish, I really dig the lines myself.
Nice little spinners.
USA = $55.00
OCONUS = $74.00

Sign up is Closed.
Here are the winners: 

20 Darriel 


10 Jerry M


12 Michelle P


13 Hey_Yo!


14 Nate


3 cindy h


15 Mr. Whippy


21 rockymtnnomad


4 Mark C


8 Matt S


16 Jared T


18 m_yo


9 kripto


2 Andrew W


17 ASH


1 Jeff R


19 Tritium


7 Rob Roy
Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
Thank you,
Kenn

Monday, August 4, 2014

Aluminum Hextuple Plus Cube **Redraw**

Hi folks,
Well I had 4 folks flake out on sending payment for their Aluminum Hextuple Plus Cubes.
I've randomly generated 4 new winners from the original sign up sale list of entrants.
Here they are:
28     Randy l
14     Fearless Leader    
4     skycap   
50     zile    
Emails with payment info have been sent.
Thanks all,
Kenn

Tuesday, July 29, 2014

Aluminum Hextuple Plus Cube SUS

Hi folks,
You may have noticed I'm making quite a few little batches of things recently.
Well, I'm diligently toiling away on the the Nebuli run, and the steps I'm on in their process have long cycle times. So instead of playing slots on my iPhone, I've been running goodies in the other CNC. 
Today for a sign up sale I have 15 "Aluminum Hextuple Plus Cubes".
Specs:
Material 6061-T6 Aluminum
These measure 1.350 cubed, and have a hand rubbed scotchbrite finish.
USA = $80.00
OCONUS = $99.00
Sign up is Closed.
Here are the winners:
9 Jeremy J


15 C W


34 RobertM


6 Ice cold


19 That guy again....


14 Fearless Leader


8 Jim M


35 Sunshine


27 Joe


47 Emily B


2 Michael j


51 AZ


25 Horace P McTitties


31 ki


22 Ramón B


Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
Thanks for dropping by,
Kenn

Saturday, July 26, 2014

Neptune Top SUS

Hello all,
I have 20 new "Neptune Tops" ready to go this morning.
Specs:
Tellurium Copper, 1.200 diameter * .750 in height with a 1/16" 440C SS hardened ball tip.
Plain machined finish, I really dig the lines myself.
Nice little spinners.
USA = $55.00
OCONUS = $74.00

Sign up is Closed.
Here are the winners:
8 Allan Z


34 Dan s


36 Patrick D


52 Dean R


46 Carol B


45 Michelle P


30 Elizabeth A


37 Hawi


40 Sean T N


51 Mark L


54 RobertM


31 Tom Toolman


33 Brian A


10 Mr. whippy


19 ASH ALINEJAD


57 William D


23 Jordoniowa


22 beau007


18 Kendall


17 Allan N

Winning Email notifications are sent from SignUpSale.com , so be sure to check your spam folder.
There will be more coming in a couple days.
Ever appreciative,
Kenn